HIGH TENSION IGNITION WIRE
| Part No. | Type | Construction Details/Application |
|---|---|---|
| 27570 | 7mm Standard | Conductor is stranded tinned copper (16 AWG). Insulation is dual-layered hi-temperature silicone rated at 482°F (250°C). Solders well. Color black. Available in 100′ rolls. |
| 21059 | 7mm Stainless Steel | Conductor is 7 strands of stainless steel. Insulation is dual-layered hi-temperature silicone rated at 500°F. Excellent for corrosive environments. Cannot be soldered. Color red. Available in 100′ rolls. |
| 27825 | 7mm Suppression | Conductor is a fine stainless steel wire wound around a non conductive inner core. Insulation is dual-layered hi-temperature silicone. Resistance is rated at 1080-1320 ohms/ft. Excellent for RFI sensitive environments. Insulation is dual-layered hi-temperature silicone rated at at rated at 482°F (250°C). Color red. Available in 100′ rolls. Terminate with 21200 series studs and stud support as described on page 47. |
| 25118 | 7mm Super Cable | Conductor is 16 strands of stainless steel (18 AWG). Insulation is tri-layered hi-temperature PTFE (about 600°F) excellent for very severe environments. Cannot be soldered. Color green available in 100′ rolls. |
| 22936 | 8mm Suppression | Conductor is a fine chromel wire spiral wrapped type over a non conductive inner wire. Insulation is EPDM rubber. Jacket is high temp silicone rubber. Resistance is rated at 425-475 ohms/ft. color is black available in 100′ rolls. Terminate with 21200 series studs and stud support as described on page 47. |
PROTECTIVE SILICONE HOSE
Reduce downtime by weatherproofing your secondary leads. . .
Now BG offers 5/16″ ID silicone hose that protects 7mm ignition wire and extends lead life. BG’s hi-temp silicone hose provides a watertight seal when used in conjunction with the connection kits shown in this catalog. Available in 100′ rolls. Specify Part No. 21606.
PRIMARY WIRE
- 16 Gauge
- High quality
- Optional letter ID
- Temperature rating
150°C for 21596
125°C for 22071 - Voltage Rating 600 volts
- Available in 100′ coils
| PART NUMBER | COLOR | LETTER ID |
|---|---|---|
| 21596-B | BLACK | NONE |
| 21596-R | RED | NONE |
| 21596-W | WHITE | NONE |
| 21596-G | GREEN | NONE |
| 21596-Y | YELLOW | NONE |
| 21596-BN | BROWN | NONE |
| 21596-OR | ORANGE | NONE |
| 21596-BL | BLUE | NONE |
| 22071-16WA | WHITE | A |
| 22071-16WB | WHITE | B |
| 22071-16WC | WHITE | C |
| 22071-16WD | WHITE | D |
| 22071-16WE | WHITE | E |
| 22071-16WF | WHITE | F |
| 22071-16WG | WHITE | G |
| 22071-16WH | WHITE | H |
| 22071-16WJ | WHITE | J |
| 22071-16WK | WHITE | K |
| 22071-16WL | WHITE | L |
| 22071-16WM | WHITE | M |
| 22071-16WN | WHITE | N |
| 22071-16WP | WHITE | P |
| 22071-16WR | WHITE | R |
| 22071-16WS | WHITE | S |
| 22071-16WT | WHITE | T |
TERMINATION FERRULE
Ferrule 22571 may be used to terminate silicone hose.
Use with nuts 21253-01, 21703 and 21214-01.
KIT P/N 22953 MAKES ASSEMBLY OF IGNITION LEADS FASTER AND EASIER
- Crimped stud terminations eliminates need to flare and bend conductor wires.
- Includes an easy to install volute spring in a threaded cup for maximum spring pressure and better electrical contact.